my computer doesnt reconize my usb backup

MY COMPUTER DOESNT RECONIZE MY USB BACKUP INSTALL
MY COMPUTER DOESNT RECONIZE MY USB BACKUP WINDOWS

Partition table entries are not in disk orderĭisk /dev/sdc: 500.1 GB, 500107862016 bytesĢ55 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors I/O size (minimum/optimal): 512 bytes / 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes

I left it in background for about 30 min.s. Mount: special device /dev/sdb1 does not existīut it stays with no output forever.

MY COMPUTER DOESNT RECONIZE MY USB BACKUP WINDOWS

There it is! ('sata bridge' used to appear in a windows notification when I plugged in the HDD in!).This means that Ubuntu detects it but is it not mounting it? The difference was Bus 001 Device 012: ID 14cd:6116 Super Top M6116 SATA Bridge. Bottomline: video explaining the solutionįollowing the first link, I input sudo lsusb in a terminal before and after connecting the HDD. I have two Ubuntu computers and it's not detected on either. It works perfectly fine on Windows (which excludes cable and hardware problems). Go back to System, touch Developer options, enable USB debugging, and select Always allow from this computer in the displayed dialog box.It's NTFS.

Go to Settings > System > About phone, touch Build number repeatedly until Developer options is enabled.If the issue persists, enable USB debugging on your phone, and try connecting your phone to HiSuite in ADB mode.

MY COMPUTER DOESNT RECONIZE MY USB BACKUP INSTALL

Click Here and click Install USB driver in the displayed dialog box.

Alternatively, manually reinstall the driver on the computer:.

In this case, reinstall HiSuite and the driver will be automatically installed with it.

If there is a question mark or exclamation mark next to the name of the driver, the driver is not successfully installed.

In Device Manager, check whether there is an ADB or HDB driver.

After you have successfully connected your phone to the computer, right-click My Computer (or This PC) on the desktop, and go to Manage > Device Manager from the shortcut menu.

You can perform the following to see whether the driver is correctly installed:.The icon displayed in the lower right corner of the computer screen does not indicate that the driver is not installed.Check whether an ADB or HDB driver is installed and works properly.In the displayed dialog box, select Always allow HiSuite connection from this computer and touch OK. Open Settings on your phone, and enter 'hdb' in the search box to search for Allow HiSuite to use HDB. If your phone and the computer are not properly connected, re-plug the USB cable on the phone end, remove the USB cable from the computer and insert it into another USB port, replace the USB cable, or restart your phone or computer and check whether the issue is resolved. The right figure shows the screen on a phone running EMUI 4.X or 5.X. The left figure shows the screen on a phone running EMUI 8.X or later/Magic UI 2.X or later. Refer to the following screenshots for USB connection alerts. This does not indicate that your phone is ready for data transfer. Please note that after connecting your phone to the computer, your phone may start charging.

If a USB connection success message is displayed in the notification panel, your phone and the computer are properly connected for data transfer. Check whether your phone and the computer are properly connected.Then perform the following to troubleshoot: Make sure the HiSuite app version is 9.0.2.300_OVE or later.

My computer doesnt reconize my usb backup